Teradek 10-0573 Beam Transmitter
Teradek 10-0573 Beam TransmitterTeradek 10-0573 Beam Transmitter

DISCONTINUED PRODUCT

Unfortunately this product has been discontinued but I'm sure we had a new and better option.   Search above or contact us via email or chat.  

VideoGuys Part # (SKU): BEAM573
MFR Part # (MPN): 10-0573
1 Beam Tx with Anton Bauer (AB) Gold-mount battery plate. Beam Tx has 3G-SDI Input, is a full HD camera-back H.264 encoder.
  • Full Description
  • Specifications
  • What's Included
  • Demo Videos
  • Reviews
The Beam Transmitter has 3G-SDI Input, is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps* using unlicensed 5GHz band with a range of 2500ft with just 2 frames of latency. Beam is multicast capable to an unlimited number of Rx over LAN and to up to 4 receivers over WiFi.

Technical Specs

BEAM Specification    
Video Compression H.264 Baseline Profile Level 4.2 with de-interlacing  
System Latency 90 - 110 millisecond delay between Transmitter and Receiver  
Wireless range 2500ft +- 200ft  
Digital Video In/Out SD-SDI, HD-SDI, 3G-SDI  
Video Port TX: SDI input and looped Output, RX: SDI output  
Supported Video Resolutions SMPTE244 480i59.94 (NTSC), 480i60 (861-D)
  IEC61179-5 576i50 (PAL)
  SMPTE 296M 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60
  SMPTE 274M 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
SDI Compliance SMPTE 259M BI.656 SDTV Digital Signal/Data Serial Digital Interface
  SMPTE 292M BT.1120 1.5Gb/s Signal/Data Serial Digital Interface
  SMPTE 425M 3Gb/s Signal/Data Serial Digital Interface
  SMPTE 299M 16bit Digital Audio Format for SMPTE 292M
  SMPTE 352M Video Payload Identification for Digital Interfaces
Bitrate RTSP Server Up to 30Mbps
  MPEG2-TS Server Up to 15Mbps
Main Digital Audio In/Out TX/RX SDI embedded audio: 48kHz 16-bit stereo linear PCM
Main Analog Audio Out RX 48kHz 16-bit stereo linear PCM with mini stereo phone output jack
Talk-Back Analog Audio In/Out RX/TX 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack
Radio Power Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna  
Radio standard IEEE 802.11a/n: OFDM  
Frequencies U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz)  
Antenna 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW  
Security 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES  
WPS Wireless Protected Setup for easy set up and security configuration  
Ethernet LAN 10/100 BASE-TX, RJ-45 jack  
Multicast WiFi: Up to 4 Receivers  
  LAN: No limit on number of receivers  
External Control Full duplex RS422 serial port  
USB Factory reset, IP configuration or firmware upgrade without PC  
Power Input/Consumption DC 7V-17V, 12 Watt  
Dimensions (H x W x D) (mm) 170 x 105 x 28 each board assembly (TX or RX)  
Weight (g) TX: 990g
RX: 610g
 
Operating Temperature 0 deg C to 50 deg C  

Comes with:
1 Beam Tx with AB Mount Plate
The Beam Tx has 3G-SDI Input, is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps* using unlicensed 5GHz band with a range of 2500ft with just 2 frames of latency.
Beam is multicast capable to an unlimited number of Rx over LAN and to up to 4 receivers over WiFi. 

Related Products