- Full Description
- Specifications
- What's Included
- Demo Videos
- Reviews
The Beam Transmitter has 3G-SDI Input, is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps* using unlicensed 5GHz band with a range of 2500ft with just 2 frames of latency.
Beam is multicast capable to an unlimited number of Rx over LAN and to up to 4 receivers over WiFi.
Technical Specs
| BEAM Specification | ||
| Video Compression | H.264 Baseline Profile Level 4.2 with de-interlacing | |
| System Latency | 90 - 110 millisecond delay between Transmitter and Receiver | |
| Wireless range | 2500ft +- 200ft | |
| Digital Video In/Out | SD-SDI, HD-SDI, 3G-SDI | |
| Video Port | TX: SDI input and looped Output, RX: SDI output | |
| Supported Video Resolutions | SMPTE244 | 480i59.94 (NTSC), 480i60 (861-D) |
| IEC61179-5 | 576i50 (PAL) | |
| SMPTE 296M | 720p23.98, 720p24, 720p25, 720p29.97, 720p30, 720p50, 720p59.94, 720p60 | |
| SMPTE 274M | 1080i50, 1080i59.94, 1080i60, 1080PsF23.98,1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60 | |
| SDI Compliance | SMPTE 259M BI.656 | SDTV Digital Signal/Data Serial Digital Interface |
| SMPTE 292M BT.1120 | 1.5Gb/s Signal/Data Serial Digital Interface | |
| SMPTE 425M | 3Gb/s Signal/Data Serial Digital Interface | |
| SMPTE 299M | 16bit Digital Audio Format for SMPTE 292M | |
| SMPTE 352M | Video Payload Identification for Digital Interfaces | |
| Bitrate | RTSP Server | Up to 30Mbps |
| MPEG2-TS Server | Up to 15Mbps | |
| Main Digital Audio In/Out | TX/RX | SDI embedded audio: 48kHz 16-bit stereo linear PCM |
| Main Analog Audio Out | RX | 48kHz 16-bit stereo linear PCM with mini stereo phone output jack |
| Talk-Back Analog Audio In/Out | RX/TX | 8kHz 16-bit stereo linear PCM with mini stereo phone input/output jack |
| Radio Power | Aggregate Power: 150mW (22dBm), 50mW (17dBm)/antenna | |
| Radio standard | IEEE 802.11a/n: OFDM | |
| Frequencies | U-NII-1 (5.15-5.25 GHz), U-NII-3 (5.725-5.85 GHz) | |
| Antenna | 3T x 3R MIMO, 3 antennas per WiMi6200TW/W1Mi6200RW | |
| Security | 802.1x, 802,11i, WPA2, WPA and WEP 64/128 TKIP 128bit AES | |
| WPS | Wireless Protected Setup for easy set up and security configuration | |
| Ethernet LAN | 10/100 BASE-TX, RJ-45 jack | |
| Multicast | WiFi: Up to 4 Receivers | |
| LAN: No limit on number of receivers | ||
| External Control | Full duplex RS422 serial port | |
| USB | Factory reset, IP configuration or firmware upgrade without PC | |
| Power Input/Consumption | DC 7V-17V, 12 Watt | |
| Dimensions (H x W x D) (mm) | 170 x 105 x 28 each board assembly (TX or RX) | |
| Weight (g) | TX: 990g RX: 610g |
|
| Operating Temperature | 0 deg C to 50 deg C |
Comes with:
1 Beam Tx with V Mount Plate
The Beam Tx has 3G-SDI Input, is a full HD camera-back H.264 encoder, capable of delivering stunning video at bit rates up to 50Mbps* using unlicensed 5GHz band with a range of 2500ft with just 2 frames of latency.
Beam is multicast capable to an unlimited number of Rx over LAN and to up to 4 receivers over WiFi.
Related Products