- Full Description
- What's Included
- Demo Videos
600 MHz HDMI switch designed for switching in home and commercial environments where switching of high-bandwidth UHD (2160P60 4:4:4) content is required. The SW42 features 4 HDMI 2.0 Inputs and 1 HDMI 2.0 output, digital audio de-embedding of active channel and an Ethernet port and WebOS for setup, switching, EDID management, firmware updates and remote reset. Additionally, the SW42 is controllable via built in IR receiver or RS-232. The SW42 also has a mirrored HDBaseT 100 meter port (single CAT5e of higher). SW42 also routes Ethernet and is compliant with the entire Zigen ecosystem of products by routing network commands and control in receiver nodes.
- Classrooms, Boardrooms, Conference rooms for switching UHD content sources via multiple control options (3rd party controllers, WebOS, simple remote or front panel buttons).
- High-end home theaters for showing UHD 2.0 content with HDCP 2.2 copy protection.
- Long distance applications where the rack is up to 100 meters from the display.
- HDMI 2.0 (600 MHz UHD) on all HDMI ports.
- WebOS Interface
- Supports digital video formats up to 4K UHD (2160P60 @4:4:4 pixel format)
- Supports digital video formats up to 4K UHD 2160P60 @ 4:2:0 8-bit on HDBaseT port
- Advanced EDID management.
- Supports uncompressed PCM 2- Ch., 5.1, 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio and more.
- Built in IR sensor plus 3.5mm jack and remote control
- IR In and Out jacks plus locking style (phoenix) connector 3-12VDC - works with everything!
- Bi-directional RS-232 – Control switch or integrate 3rd party control.
- SPDIF for audio de-embedding
- Dual Power Supply
HDMI 18 GBP/sec
HDBaseT 10.2 GBP/sec
All SMPTE & VESA in HDMI 2.0 Specification. Max SMPTE UHD - 4096x2160P60/RGB/4:4:4
Max for HDBaseT port is 2160P60/4:2:0 8-bit (HDBaseT/CAT limitation)
Color Bit Depth
8-bit, 10-bit, 12-bit & 16-bit per pixel
Note: Resolution and video bandwidth limited – ex. 2160P60 RGB or 4:4:4 8-bit would use almost the entire 18 GBPS of bandwidth. 2160P60 4:2:2 10-bit (new Blu Ray) would exceed the previous 10.2 GBPS maximum of HDMI 1.4a and would not be able to travel over category cable using HDBaseT as of this writing.
4:4:4, 4:2:2, 4:2:0
See note above – chroma subsampling or color compression is related to bit depth and video resolution settings with regard to total bandwidth requirements. A 4K/60 signal at 4:4:4 chroma subsampling can have a maximum bit depth of 8 bits.
HDMI in & Out – Up to Dolby TrueHD and DTS-HD Master
SPDIF – Up to Dolby Digital & DTS 5.1
Audio Sampling Rates – Up to 1536 KHz
Distance - HDMI – Up to 5M @ 4K, HDBaseT - Up to 100 meters at 4K/60 4:2:0 8-bit
HDCP - 2.2, 1.4 or None
CEC - Pass through
4 x HDMI type A HDMI Input
1 x HDMI type A HDMI Output
1 x RJ45 HDBaseT 100M Port
1 x SPDIF Digital Audio Output
1 x RJ45 LAN Port for TCP/IP Control
1 x 9-pin RS-232 Port
1 x 3.5mm IR In Port
1 x 3.5mm IR Out Port
1 x 5-pin Locking IR Connection (phoenix) in/out 3-12 VDC
1 x IR Sensor (In)
1 x IEC 110-220 VAC Connector
Temperature – Operating 32-122 F (0-50 C), Humidity: 20-90% non-condensing.
FCC, HDBaseT, CE, RoHS, HDCP, HDMI