- Description
- Specifications
- What's Included
- Demo Videos
- Reviews
The Bolt 500 Transceiver Set comes with one Transmitter and one Receiver.
 |
Longer Range Transmit visually lossless |
 |
20MHz Channels Use more than twice as many Bolts in one location or avoid interference like never before. |
 |
2 New DFS Channels Operate interference-free |
 |
20% Smaller Chassis Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed. |
 |
Individual Identity Easily identify which Bolt |
 |
Rapid Reconnection Reconnect times during a dropped link are now instantaneous once you move back into range. |
 |
Built-In HDMI to SDI Converter Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device. |
 |
More Robust Than Ever Before Reach your Bolt’s full range |
Bolt Pro 500 HDMI Video TX
Video -
Video Inputs
• 1 x HDMI (Type A receptacle)
Video Outputs
• None
Sdi Ancillary Data Support
• Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
• https://support.teradek.com/hc/en-us/articles/217446087
Color Sampling
• HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx
• <0.001sec (when no video format conversion is enabled)
Supported Resolutions
• 1080p 23.98/24/25/29.97/30/50/59.94/60
• 1080psf23.98/24/25/29.97/30
• 1080i50/59.94/60
• 720p50/59.94/60
• 480p59.94/576p50 (via HDMI ports only)
• 480i(NTSC)/576i(PAL)
Video Compression
• visually lossless
Color Correction
• CDL/1024 1D LUT (supports 10-bit color)
• 33x33x33 3D LUT (supports 10-bit color)
Audio Compression
• 48kHz 24-bit PCM
Audio Input
• Embedded Audio Input
Dimensions
• 1"x2.6"x4.0"(24mmx66mmx102.1mm)
Weight
• 7.6oz(217g)
Construction
• Milled Aluminum(Chassis) and regulation-compliant PCB
Http
• None
Configuration Interfaces
• None
Switches
• On/Off and Reset Switch
Desktop App
• Feature-rich Bolt Manager Application for OSX & Windows
Usb Interface Functionality
• Upgrade via Mini-USB
Wireless
• Non-DFS Frequencies:
• US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
• EU & JP: 5.19 ~ 5.23 GHz
• DFS Frequencies:
• US: 5.27 ~ 5.55 GHz and 5.67 GHz
• EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection
• Auto only
• (NOT configurable)
Encryption
• AES-128
Rf Power
• 17dBm EIRP
Range
• Up to 500ft line of sight
Unicast Multicast
• Unicast / Multicast
Noise Rejection
• Can coexist with WiFi and 5GHz cordless phones
Power Input
• 2-Pin Connector 7-28 VDC
Battery
• None
Nominal Power Consumption
• 7.3 Watts (Measured at 1080p60)
Operating Temperature
• 0 ~ 40 deg-C
Mountability
• Multiple mounting options with 1/4" holes
Bolt Pro 500- HDMI Video RX
Video Outputs
• 1 x HDMI Type-A receptacle
• 1 x USB 3.0 micro B receptacle
Sdi Ancillary Data Support
• Supports transmitting metadata, timecode, and start/stop flags from certain camera manufacturers. Please refer to:
• https://support.teradek.com/hc/en-us/articles/217446087
Color Sampling
• HDMI: RGB 4:4:4, 8-bit
Delay Tx To Rx
• <0.001sec (when no video format conversion is enabled)
Supported Resolutions
• 1080p 23.98/24/25/29.97/30/50/59.94/60
• 1080psf23.98/24/25/29.97/30
• 1080i50/59.94/60
• 720p50/59.94/60
• 480p59.94/576p50 (via HDMI ports only)
• 480i(NTSC)/576i(PAL)
Video Compression
• visually lossless
Test Pattern Generator Support
• Custom output formatted test pattern over HDMI and SDI.
Color Correction
• CDL/1024 1D LUT (supports 10-bit color)
• 33x33x33 3D LUT (supports 10-bit color)
Audio Compression
• 48kHz 24-bit PCM
Audio Input
• Embedded Audio Input
Dimensions
• 1.0" x 3.5" x 5.8" (25.2 x 88.9 x 146.5mm)
Weight
• 10.5oz(299g)
Construction
• Milled Aluminum(Chassis) and regulation-compliant PCB
• Plastic Cap
Http
• None
Configuration Interfaces
• No OLED Screen
• There is an OSD that appears on the Video Output which can be controlled with the Menu Joystick
Switches
• On/Off and Reset Switch
Desktop App
• Feature-rich Bolt Manager Application for OSX & Windows
Usb Interface Functionality
• Upgrade via Mini-USB
Wireless
• Non-DFS Frequencies:
• US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
• EU & JP: 5.19 ~ 5.23 GHz
• DFS Frequencies:
• US: 5.27 ~ 5.55 GHz and 5.67 GHz
• EU & JP: 5.27 ~ 5.67 GHz
Rf Channel Selection
• Auto only (NOT configurable)
Encryption
• AES-128
Rf Power
• 15dBm EIRP
Range
• Up to 500ft line of sight
Unicast Multicast
• Unicast / Multicast
Noise Rejection
• Can coexist with WiFi and 5GHz cordless phones
Power Input
• 2-Pin Connector 7-28 VDC
Battery
• None
Nominal Power Consumption
• 9 Watts (Measured at 1080p60)
Operating Temperature
• 0 ~ 40 deg-C
Mountability
• Multiple mounting options with 1/4" holes
General
- 2 x HDMI 18in Cable (Type A to Type A)
Transmitter
- 1 x 2-pin Lemo to PowerTap 18 inch Cable
- 1 x Hot Shoe Adapter (1/4"-20 inch)
- 1 x HDMI 18in Cable (Type A to Type A)
Receiver
- 1 x Thumb Screw 1.25 inch length (1/4"-20 inch)
- 1 x Lightstand Adapter (1/4"-20 inch)
- 1 x SDI (BNC to BNC) Cable 10 inch
- 1 x USB 3.0 Cable A to Micro B (3ft Length)
- 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
- 1 x 1-Year Warranty1 x HDMI 18in Cable (Type A to Type A)