With highly refined software, new wireless radios, and a redesigned chassis, these new models are the most reliable and capable monitoring solutions we have ever built. Metadata and timecode support, 3D LUTs, dual inputs/outputs, multicast capable, manual frequency selection and USB 3.0 GRAB Engine are all included on these new models but with the following new features:
 |
Longer Range
Transmit visually lossless video up to 1000ft with no delay.
|
 |
20MHz Channels
Use more than twice as many Bolts in one location or avoid interference like never before.
|
 |
2 New DFS Channels
Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels.
|
 |
20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed.
|
 |
Individual Identity
Easily identify which Bolt TX and RX work together with removable colored top plates.
|
 |
Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range.
|
 |
Built-In HDMI to SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device.
|
 |
More Robust Than Ever Before
Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created.
|
More about Bolt 1000
- Latency: < 0.001 seconds
- Range: 1000ft
- Multicast: Up to 4 Rx
- Size (TX): 24x66x102mm
- Weight TX / RX: 238g / 380g
- Input / Output: 3G-SDI & HDMI
- Resolution / Frame Rate: 1080p60
- TX HDMI / SDI Converter: YES
- Number of 20 MHz DFS Channels: 0
- Number of 40 MHz DFS Channels*: 11
- Rapid connect: YES
- Gen 1 Sidekick Compatible: NO
- Metadata support: YES
- USB 3.0 Grab Engine: YES
* Based on USA channels. Channel availability may vary by region.