Do you need Autotracking or "Super" PTZ Camera Control? PTZOptics has you covered! A Videoguys Intro to the HuddleCamHD SimplTrack2 and the NEW PTZOptics SuperJoy

Gary is joined on today's Videoguys Live Webinar by Paul Richards, the Chief Streaming Officer at PTZOptics and HuddleCamHD to discuss two exciting new products- the HuddleCamHD SimplTrack2 and the PTZOptics SuperJoy PTZ Camera Controller. 

Gary and the Videoguys Tech team demo these products live, before kicking things over to Paul Richards, who expands heavily on both exciting products.  

Check out the webinar, below. 


The SimplTrack2 is a great solution for auto tracking in settings such as a lecture hall, or corporate board room, perfect for productions without a camera man.  It also has a host of customizable features including safe spaces and manual panning, tilting and zooming. 

SimplTrack2 also has a great software UI that makes it easy to control and customize.  This is where you create safe margins, and regions of interest.  Users can plan where a speaker will be standing so that the auto tracking can take over during the actual event, and the camera will not stray to an area that they don't want shown. 

The SimplTrack Software can be downloaded from HuddleCam HD resource library, linked HERE.

Check out the UI below.

Here you'll see the basic setup for the SimplTrack2 Software Interface.  In this example, two SimplTrack2s are active.
Check out some more customizable Features below:
Here, you'll see the image being mapped out, allowing users to customize what they want to be captured in the image.


The PTZOptics SuperJoy PTZ Camera controller is a great solution for controlling multiple PTZ Cameras simultaneously.  Its a great way to customize the motion in your PTZ Camera Live Production.  It can control PTZ Cameras from PTZOptics, BirdDog, NewTek, Panasonic, Sony and more.  If it has IP Control, SuperJoy can control it.

In addition, there are multiple modes available on the SuperJoy for productions with different needs.  The modes include:

  1. Basic and Basic Plus mode can limit functions to presets and single camera control, for a straight forward production.  
  2. Matrix Mode enables operators to create and call presets across up to three cameras simultaneously. 
  3. Custom buttons can also be built by expert users for automation, or control an external production system.

Check out the webinar on YouTube HERE.

Learn more about the SuperJoy HERE.

 Learn more about the SimplTrack2 HERE.


Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.